Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's subtle, doesn't have key fobs or LED indicators and is hidden within the wiring of the vehicle.
The user can also disable the system temporarily by using Transport Mode when renting their vehicle. This guide will walk you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key cloning attacks, hacking attacks and relay attacks. The system is connected directly to the ECU of your car and protected by a PIN code that you choose. It is not detected by thieves using diagnostic scanners or other modern methods. It is not able to be disabled using circuit cuts.
The system is easy to use, however it is essential to have a professional installation to ensure a clean and secure connection to your vehicle's ECU. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
To avoid the accidental deployment of airbags or short circuits, the installer must first disconnect your battery. Once this is done, the installer can safely begin work. Basic hand tools can be used to ensure precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable tie are essential to protect connections and keep wiring tidy. The Ghost Immobiliser user manual will provide specific instructions tailored to your model.
During the installation, it is important to choose the right grounding location that is free of debris and paint. Installers should also make sure that the immobiliser's wires CAN H and the CAN L are connected to the appropriate ECU ports. The wires can be plugged in or soldered based on the model. To ensure a reliable and long-lasting connection it is recommended you use a high-quality plug.
Transport Mode can be activated by the customer once the installation is completed. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. To do this, the customer has to press the service button on the dashboard 5 times in a matter of 2 seconds. Once this is done, the system will confirm with 5 signal indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who rent out their vehicles often through platforms like Turo. An immobiliser can lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
You can't go far wrong with an autowatch ignition device if you want to protect your car from thieves. The device prevents your vehicle from running even the case that someone steals or copies your key. This is due to its advanced technology, which is designed to stop the car's engine from starting unless the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and wheel to create a unique sequence only you can identify, making it impossible for anyone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing an immobiliser from Ghost is simple, but you must follow the instructions to avoid electrical problems and malfunctions in the system. You must first locate a power supply of 12V and a solid grounding on the chassis of your car. Then, you can start connecting the wires to the immobiliser. Use high-quality connectors and soldering methods to create an effective connection. Also, be sure to protect the connections by insulating them with heat shrink tubing and insulation tape to protect them from electrical short circuits and other problems.
After the wires have been connected, you can reconnect the battery and then turn on the engine to test the function of the immobiliser. Once you have verified that everything is functioning properly then you can put the immobiliser in a secure position inside the vehicle. Make sure to cover it well so that a thief cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent to car burglars. It is invulnerable to key cloning and hacking and is not able to be disabled without the code. It is also simple to use and is able to be put into an auto valet mode so that your automobile is not activated when you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It is directly connected to the vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using scanners for diagnostics. This is because the system does not transmit and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash two times to confirm that you have entered the correct code. Now you can start your vehicle and drive in a safe manner.
Once installed, the Ghost Immobiliser will secure your vehicle from hacking and key cloning, while protecting the value of your car's pride and joy. If you ever need to hand over your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Make sure both are properly insulated and can be touched. It is also recommended to use cable ties to tie and secure the wires, since this reduces the risk of being tampered with by thieves. Be sure to verify the location of these points to avoid committing a mistake, and mark them with a piece of tape or label. Check every connection for signs that they're wearing out. Loose connections can lead to problems with the system, so be sure they're securely in place and securely insulated. Don't forget to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit functions properly and that all connections and insulation are safe. If you encounter any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your car's ECU to prevent the engine from starting without authorization. Its innovative technology protects your vehicle from hacking, key cloning, and other methods that thieves employ to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the most effective security for your car. The Ghost's unmatched features, paired with its discreet design makes it a preferred choice for car enthusiasts and security conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it's important to follow every step of the installation procedure. Refer to the wiring diagram of the vehicle to assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once these are found then you'll have to mark them in a way that they're easy to identify when installing. In addition, it is essential to use high-quality tools and materials. Basic hand tools can help you make precise connections. A multimeter will check electrical values, and ensure safety. Insulation tape and cable tie ensure that all connections are neat. Additionally, a user's manual will provide specific instructions specific to your Ghost model.
Before you begin installing, it's important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser works as intended and will stop vehicle starts that are not authorized. It's recommended to perform this procedure regularly as part of your regular inspections of the vehicle to ensure the system is always functioning correctly.
Once the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will guard your pride and joy from would-be car thieves. It will ensure that no one can take your car away if they do not have the correct PIN code. www.thekeylab.co.uk can also be linked with a tracker approved by Thatcham to identify any attempts to steal or tamper and allow you to track your vehicle in the event of it being stolen.
The Ghost is compatible with a variety of vehicles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines in the installation of our products. This ensures customers, insurance companies, and law enforcement agencies that installations are done safely and correctly.
